8000-9000b/H 6 Cavity Full Automatic Servo Pet Plastic Oil Bottle Blow Molding Machine

• Customization: Available
• Type: Special Structure Bottle Blowing Machine
• Automatic Grade: Automatic
• Model NO.: E-ST600-6S
• Warranty: 1 Year
• Product Name: Blow Molding Machine
• Production Capacity.: 600ml
• Suitable for: Mineral Water, Pesticides, Cosmetics Bottle
• Feature: High Efficiency, Stable Performance
• Transport Package: Standard Pack
• Trademark: E-star
• Origin: Taizhou
• HS Code: 8477309000

Product Description

8000-9000B/H 6 Cavity Full Automatic Servo PET Plastic Oil Bottle Blow Molding Machine
8000-9000B/H (up to 600ml)

Product Description

1.Brief Introduction
 

The E-ST600-6S is a 6 cavity fully automatic PET blow molding machine designed for high-efficiency production of plastic containers and bottles up to 600ml. This versatile machine handles various bottle types including carbonated beverage bottles, mineral water bottles, pesticide containers, oil bottles, and cosmetic packaging with precision and reliability.

2.Settings:

1).PLC display: Mitsubishi
2).Pneumatic and valve parts: SMC,AIRTAC 
3).Touch screen: Mitsubishi
4).Servo motor:Xinje(Stepping, Stretching, Clamping,Preform Loading)
5).Relay::OMRON
6).Other electric parts are all world-famous brand

3.Machine Features:

1)Reasonable design, use three servo motors and full automatically control, save power and labor. 
2)Feeding system carries the preforms by robot arms automatically.
3)Infrared oven heater adopts the quartz lamp to heat the PET tube.
4)Fully automatic process with low investment, high efficiency,quick and safe for operation, easy for maintenance.
5)We have perfect service after sales.
6)Adopting high quality components.

4. Flow Chart

5.Connect Drawing:
 

Product Parameters

ITEMS	UNIT	E-ST750-2	E-ST1500-2S	E-ST600-4S	E-ST1500-4S	E-ST600-6S	E-ST1500-6S	E-ST600-9S
BOTTLE SPECIFICATION
Cavity No.	CAVITY	2	2	4	4	6	6	9
Max.Bottle Volume	L	0.75	1.5	0.6	1.5	0.6	1.5	0.6
Max.Neck Diameter	MM	38	38	38	38	38	38	38
Max.Bottle Diameter	MM	76	105	68	102	68	102	68
Max.Bottle Height	MM	260	330	260	330	260	330	260
Max.Preform Height	MM	100	140	100	140	100	140	100
Theoretical output/BPH		2500	2000	5500	4000	8500	7000	12000
CLAMPING
Clamping Force	KN	180	200	400	480	560	650	720
Mold Stroke	MM	82	135	90	125	90	125	90
Stretching Stroke	MM	370	450	260	330	260	330	260
Bottom Stroke	MM	50	50	50	50	50	50	50
Cavity Pitch	MM	100	120	76.2	114.3	76.2	114.3	76.2
ELECTRICAL POWER
Number Of Lamp	PCS	14	18	28	48	40	80	48
Max.Heating Power	KW	28	36	56	92	64	96	144
Installed Power	KW	30	38	58	98	69.5	100	180
Actual Power Consumption	KW	12	15	19	25	32	40	60
Voltage/Frequency	V/HZ	3P 380V±10%, 50HZ/3P 220V±10%, 60HZ
AIR SYSTEM
Operating Pressure	Bar	≤9	≤9	≤9	≤9	≤9	≤9	≤9
LP Air Consumption	L/min	1600	1600	1000	1000	2000	2000	2000
Blowing Pressure	Bar	≤35	≤35	≤35	≤35	≤35	≤35	≤35
HP Air Consumption	L/min	1600	2000	3200	4000	48000	6000	8000
MOLD COOLING WATER
Temperature Range	ºC	10-20	10-20	10-20	10-20	10-20	10-20	10-20
Cooling Power	HP	3	3	5	5	8	8	8
MACHINE
Machine Size	M	2.0x1.5x2.0	2.0x1.8x2.2	4.0x1.8x2.1	4.8x2.0x2.2	4.8x2.0x2.1	5.8x2.2x2.2	6.28x2.25x1.9
Machine Weight	KG	1800	2000	3500	4500	5500	6000	7500
Attention	The output is based on 500ml 18g In order to make the equipment more energy-saving, stable and high efficiency parameters will continue to be updated based on the actual product.

 

Items	Brand
air-break switch	MITSUBISHI
relay	OMRON
option switch	Schneider
green directive button	Schneider
emergency stop switch	Schneider
normally open contact	Schneider
normally closed contact	Schneider
photoelectric switch	China
Blowing Valve	Quanjia
Action Valve	SMC
travel switch	OMRON
proximity switch	China
photoelectric switch	China
touch screen	MITSUBISHI
PLC	MITSUBISHI
Servo motor	Xinje
Server driver	Xinje
Planetary reducer	FASTON (Taiwan )
Rotary cylinder	Airtac  (Taiwan)
Clip catch cylinder	MINDMAN  (Taiwan )
Electromagnetic valve	MINDMAN  (Taiwan )
High pressure blowing valve	QUANJIA (Joint Venture)
one-way throttle valve	KONGYOU (USA)
Intermediate Relay	SCHNEIDER  (France)
Electricity power	MEANWELL  (Taiwan )
Photoelectric Switch	OMRON  (Japan )
Infrared Lamp	HAICHUANG (China Mainland)

Detailed Photos

Mold

Bottle

 

Auxiliary Equipment

HP Screw Piston Booster Compressor

Model

MVS-6.0/40

Dimension

3500×1300×1500mm

Weight

3000kg

1.Technical Features:

Item	DMG Screw Piston Booster Technical Advantages
Stable Operation	Suitable for 24-hour uninterrupted operation, with sufficient air volume and maximum pressure of 4.0Mpa (G)
Structure	It occupies a small area and has a compact structure.
Lubrication	The mechanical oil pump of the booster supplies oil to lubricate the moving parts;
Cooling	Water cooling system is with high efficiency, low discharge temperature and low noise.
Piston Booster	1.Uniquely designed heat dissipation runner of the cylinder
	2.V-shaped balanced compression with small vibration;
	3.The leakage of the intake and exhaust valves is minimized and the efficiency is higher;
	4.The cylinder has good heat dissipation temperature and the piston ring is more wear-resistant;
	5.Optimized system.
	6.The piston ring adopts cast iron + alloy structure, which is wear-resistant and has long service life;
	7.Few maintenance parts and low cost.
Discharge Temperature	The front section uses a screw host for compression, which directly increases the air pressure to 0.8~1.2MPA. The rear section uses a piston machine to pressurize, and the exhaust temperature between compression chamber stages is lower than 120°C.
Noise	The low pressure is using screw host for compression, which is connected to the suction compression, and the noise during the suction process is low.
Maintenance	Maintenance is simple and can be performed by ordinary workers, with low maintenance cost and short maintenance time.
Installation	1.No foundation or hoisting is required, it can be installed on site and is easy to use;
	2.Easy maintenance and can be operated by one person;
PLC System	The operation interface uses a touch screen to control all components, and the graphical operation interface is more concise and easy to use.

2.Technical Parameters
-Air compressor,Air tank, Air dryer,air filters

Item	Unit	Technical Parameters	Remarks
Machine Model		MVS-6.0/40
Working medium		Air
Structure		V Type
Cooling Method		Water-cooled
Lubrication	Screw	Oil Spray
	Piston	Micro Oil lubricated by Oil Pump
Drive Way		Direct/Belt	Screw: Direct Drive Piston: Belt Drive
Compression Stage		2	Screw: 1 Stage Piston: 1 Stage
Air Capacity	Nm^3/min	6
Intake Pressure	MPa(a)	0.1	Absolute Pressure
Discharge Pressure	MPa(g)	4	Relative Pressure
Intake Temperature	ºC	≤45
Discharge Temperature	ºC	≤Ambient Temp+15ºC	After cooling
Crankshaft Speed	r/min	680
Discharge Pipe Size	MM	1 1/2"	Final Discharge Port
Oil Pump Pressure	MPa(g)	0.2~0.4
Net Weight	Kg	2200
Compressor Dimension	mm	2400×1350×1350	L×W×H
Motor	Model	LKY-180L3-2-45KW	Speed	2970
		YE3-180L-4-22KW		1470
	Power	Screw Motor: 45kW	Power	380V/50Hz/3 Phase
		Piston Motor: 22kW
	Rotating direction	Clockwise by flywheel side.	Ingress Protection	IP23/IP 54

 

Model		DMG-6.5HQ-400 (4.0MPa)
Tank Volume	L	400+1000	Skid mounted
Air Dryer Capacity	m³/min	6.5
Air Dryer Power	Kw	1.6	220V/50HZ/Skid Mounted
Pressure Dew Point	ºC	2~10
Filtration Precision	μm	≤0.01	C/T/A 3 stage Filters (Skid Mounted)
Residual Oil Content	PPM	≤0.01	C/T/A 3 stage Filters

 
Cooling tower and pump

Model	20T/H
Flow	15 m³/h
Press	18 Kpa
Dimension(D*H)mm	1200*2370mm
Fan Diameter(mm)	770mm
Motor Power(kW)	0.37 kw
Dry Weight	150kg
Wet Weight	700kg
Pipe Size	Inlet DN50
	Outlet DN50
	Over DN25
	Drain DN25
	Makeup DN15

LP Screw Piston Booster Compressor

Model	DMG-22FPM
Flow Rate	3.0m³/min
Discharge Pressure	8bar
Ambient Temperature	-5~+45
Cooling Method	Air cooling
Discharge Temperature	Ambient Temperature+15ºC
Drive Method	Permanent Magnet Synchronous
Power supply	400V50Hz
Power	22kw
Starting method	Variable Frequency Start
Dimension (L*W*H)mm	1080*850*1200
Net Weight	290KG
Outlet Pipe Diameter	Rp1

10HP Water Chiller

Model			10HP
Refrigeration Capacity		kw	30.5
		Kcal/h	26230
Compressor	Input Power	kw	4.5x2
	Rated Power	Hp	5x2
Evaporator	Type		Shell evaporator
	Pipe Diameter	Inch	2
Refrigerant	Type		R22
	Quantity	Kg	5
Water Cooled Condenser	Type		Shell condenser
	Pipe Diameter	Inch	2001/1/2
Chill Water Flowrate		L/min	110
Air Cooled Condenser	Type		Finned condenser
	Fan Power	Kw	0.4x2
Water Tank Capacity		Liter	70
Pump	Power	Kw	1.5
		Hp	2
	Flow Rate	L/min	100
Pipe Connection Size	Cooling Water Outlet	Inch	2
	Cooling Water Inlet	Inch	2
Dimensions (LxWxH)	Water Cooled	mm	1550x700x1280
Weight	Water Cooled	Kg	300

Machine Details

1.The features of blowing machine:

The whole machine is designed according to the linear high-speed machine, and the equipment is lengthened to ensure high quality product and high output, which can be suitable for rapid prototyping of various bottles.
2.Preform transfer system:

-Adopting the connecting rods structure.

-Advantages: Light weight, wear resistant. When the machine is running and running for many years,the rods length is always fixed. And the center distance won't be changed.(If chain type, long-term running, will elongated the center distance)
3. Mold Clamping Unit:

-Using Double servo motor for clamp make sure the clamping machine more stable and high speed operation,strong clamping force, then the bottle joint line is very slim and beautiful.

-Using the auto dosing lubrication system, so that the lubricating points of the clamping equipment can get uniform lubricating,ensure the clamping force is durable and reliable.
-The servo stretching system and servo clamping system have the advantages of uniform stretching speed,strong tensile strength and good product molding. 

-It will only take 15 minutes to change the mold. Because the bottle blowing mold is with positioning function.
4.Efficiency constant temperature oven:

-Each layer of lamp are separately controlled.

-Heater flexibility: The height and width of reflector and lamps in heating zone can be adjusted .Which can fit for different kinds of pet preform heating ,meanwhile. Automatic vent temperature device is equipped to keep the oven temperature steady.

-Preform self-rotation system,ensure every side of every preforms are heated evenly,which ensure quality of blown bottle.

-Neck cooling in oven: preform necks are cooled by recycling water and wind, which avoid neck deformation.
-Using the most advanced high frequency ruby infrared lamps,increasing heating efficiency 30%-50%
5.Intelligent:

Adopting advanced human-computer interface to control the whole working procedures.with steady performance and easy for operation,maintenance.

6. Full automation:

Take-in preform, heat, blow ,take out bottle all are automatic.with the advantage of non-pollution, high efficiency. 

7. Security:

Every mechanical action with safety self- lock device.When the process has problem .it will switch to secure state automatically.

8. Two ways of operating:

Automatic and manual.The safe and reliable unique valve position design makes the air path more clear.

9. Hygiene:

The bottle body is non-pollution. 

10.Higher production capacity: 

The rate of good finished bottle is up to 99.8%.

Company Profile

Taizhou Easy Star Machinery Co.,Ltd. is a professional manufacturer of blow molding machines,preforms and plastic molds in China. We can provide a full range of services, whether it is molds, production machines, complete production lines, E-star can give you the best solution.

E-star's main products are various types of blowing machines. Plastic molds and other series of products. The products have the advantages of high degree of automation and stable performance. And are well received by domestic and foreign customers. Among them. The full-electric blow molding machine has reached the international leading level, and the products are exported to Europe, America, the Middle East, Southeast Asia and other places. Even in harsh climates(cold or tropical),E-star blow molding machines can operate stably. We have pre-sales and after-sales service teams, so your machine can get the best guarantee.

With more than 20 years of development experience and a highly fexible production development team, we can discuss and customize requirements for each case to create a financial tool that meets your needs. Whether it is used in Beverages,Water, Edible oil,Daily necessities, Cosmetics,etc., 
E-star's blow molding machines can help you complete the production of PET bottles of various capacities.

FAQ

Q:Where is your factory located?
A:Our factory,near Shanghai, located in Taizhou,China

Q:What is your trade term?
A:Normally FOB NINGBO, if customer country requires, also can accept L/C at sight.

Q:What is your payment term?
A:30% down payment against order confirmation, 70% balance payment prior shipment.

Q:Have blow machine 100% assembled well in stock?
A:No. All blow machine will be assembly produced according to your order.

Q:What is your delivery time?
A:Usually in 45-60days, depends on your projects.

Q:What about installing in customer factory?
A:After machine arrived at your factory, please prepare water, electric,air and preform, then we will arrange engineer to install machine and train your workers, the longest time to free install shall be in one week, you should afford engineer air tickets, food, hotel,transport.

Q:Guarantee time?
A:One and a half year guarantee, not man-made.